For entries in this group, any base is not considered in your judging decisions even if it is present. ModelBase weights the criteria based upon the table below. If a criteria element is not present record a value of “0” on the tablet scoring page.
The ModelBase scoring system will automatically apply these percentages when your rating of 1-10 is entered into it.
Criteria Scoring Guidance
“Construction” is defined as the technique used to: a) form component parts to their proper shape and size; b) fit component parts together properly; and c) join the component parts properly. Flash should be removed. Mold marks, sinks, copyright marks, and ejector pin marks should be eradicated. There should be no seams, glue marks or sanding scratches. Hollow areas and joints should be filled where necessary. Contour errors should be corrected. Scratch-built items or added detail on kits should be consistent in construction and detailing. If panel lines on joints show in one area the same effect should be seen over the entire model. Overly thick parts should be thinned down to scale size or replaced with suitable materials.
Models of TV or film subjects should match the on-screen appearance.
Paint and Finish
“Paint and Finish” is defined as the technique used to provide appropriate color, texture, and appearance to the model. Applied paint should be even and smooth, unless there is prototypical evidence to the contrary. No paint brush marks should be evident where not appropriate. Fingerprints or smudges imprinted in the paint, or of a different color, are major errors. Flat or gloss finishes should be consistent and appropriate to the context of the model. Demarcation lines between differing colored areas should be straight and crisp lines particularly on clear parts. Paint edges should be sharp and should not have a raised edge where tape was applied. Weathering and age effects should show concert for scale (i.e., size, location of paint-chipped areas), concern for the terrain and environmental factors the real model was exposed to. Rocket nozzles show weathering or heat discoloration after use, so a display of a craft after any sort of engine burn should show some evidence of it. Real spacecraft special notes: Reentry vehicles should show aerodynamic heat damage/weathering if modeled post-flight. Various spacecraft show details or weathering peculiar to the specific vehicle and should be duplicated. For example: tire weathering on the shuttle sides; metallic thermal blankets on the Gemini adapter section; the change of the Apollo Command Module from a polished metallic look to a mixture of flat brown, tan and gray after re-entry.
“Decals” are defined as waterslide or dry transfer type designed to provide detailed markings, numbering, lettering, etc. to the model. Where such markings are designed and scratch-painted, they are still considered “decals” and should have the same properties. Edge decal film should not be readily apparent. There should be no silvering or bubbling under the decal. Decals should be aligned properly and of the correct scale size unless there is evidence to the contrary. Decals should be of uniform finish (important on kit-bashed models using multiple decal sheets).
“Details” are defined as the properly rendered and to-scale detailed features of the model. Details should supplement the basic model and enhance the scale effect portraying it accurately. For example, open wheel wells should be properly appointed (if necessary scratch-built) if displayed open. Electrical lines and cables should be added where required. Guns barrels, exhaust stacks, intakes, vents, etc., should be drilled out. Smaller items added to the model (i.e. weapons, munitions, accessories, etc.) should be in-scale or not noticeably different. External or internal stores on the model should have undergone the proper care construction and finish as the basic kit. After-market parts (photo-etched, white metal, resin, etc.) should integrate well with the basic model. Photo-etched parts which require forming should be precisely shaped and any surfaces that require building up to a thicker cross-section should be smooth and uniform. Antennae that are over-scale should be replaced or modified to be of proper dimension. Rocket and bomb fins usually should be replaced by thin plastic card.
No award – score 1 or 2 out of 10 possible
Merit – score 3 or 4 out of 10 possible
Bronze – score 5 or 6 out of 10 possible
Silver – score 7 or 8 out of 10 possible
Gold – score 9 or 10 out of 10 possible